E' disponibile anche un modulo software per l'accesso facilitato alla scheda EtherIO24 con il linguaggio PERL: Net-Elexol-EtherIO24

The Ether I/O 24 is an UDP/IP controlled digital Input/Output module. The module features three 8-bit ports with 5V level signal lines. Each of the 24 lines can be independently programmed as either an input or output.

The module connects to any Ethernet network supporting the TCP/IP protocol suite and can communicate with any point on that network. By connection with an Internet Router the device can communicate with any Internet connected device

Supports ARP, BOOTP, DHCP, ICMP and UDP/IP Protocols
Industry standard 10BaseT Ethernet Interface with an industry standard RJ-45 Connector
24 independently programmable signal lines with configurable CMOS, TTL or Schmitt Trigger thresholds and programmable pull-ups per line
Easy connection by three 10 way box headers to suit low cost, standard IDC or Crimp connectors
Integrated Switch Mode Voltage Regulator allows power from any 8-32V DC Power source
User 5V 500mA output to power external Interface boards or sensors
Compact module measures only 72mm x 72mm x 24mm
Advanced configuration allows the modules to automatically scan the input ports and transmit changes directly to another ETHER I/O 24 module without host connection or to any Internet Port by router connection
On board EEPROM allows all ports to power up in a user programmable state
Programmable Fixed IP or Dynamic IP assignment from a DHCP server
Small packet size and connectionless protocol allows for Real Time sensing and control
Can be connected to a wireless network gateway or access point for wireless operation

Low Power consumption only 1.1W fully operational


APPLICATIONS

Home or Industrial Automation
Digital Input and Output from any Networked PC
Remote Data Acquisition and/or Alarm Monitoring by Network or Internet
PC Controlled Machines and Distributed Machine I/O
Remote Lighting / Power control and/or monitoring